PCSTATS     
[X]   Directory of
Guides & Reviews

Beginners Guides
Motherboards by Brand
Weekly Newsletter
Archived Newsletters

+70 MORE Beginner GUIDES....
ABIT KR7A-133RAID Socket A Motherboard Review
ABIT KR7A-133RAID Socket A  Motherboard Review - PCSTATS
Abit has always had a warm spot in the hearts of overclockers because they openly embrace the enthusiast market.
 80% Rating:   
Filed under: Motherboards Published:  Author: 
External Mfg. Website: ABIT Mar 28 2002   C. Sun  
Home > Reviews > Motherboards > ABIT KR7A-133RAID

Abit KR7A-133RAID Socket A Motherboard Review

Abit has always had a warm spot in the hearts of overclockers because they openly embrace the enthusiast market, which can sometimes be a dangerous path to walk. While Abit has never openly endorsed overclocking, they have made attempts to please the performance user in this regard. The first such example is of course the ability to change FSB in 1 MHz increments.

In general Abit have opened up a lot of features in the BIOS which allow the user take full control of the system, and in recent times Abit have even coined their own "Abit Engineering" ideology. With such milestones as onboard IDE/RAID controllers and overclocking stripes it's little wonder.

In typical Abit fashion, the KR7A-133RAID is a little bit more expensive then the curve. Weighing in at $250 CDN it's probably one of the most expensive VIA KT266A boards around. Knowing that the KR7A-133R has a KT266A chipset just about guarantees it will be a good performer, but how does Abit separate itself from the rest?

With a 4x AGP 2.0 slot, six 32 bit PCI's, VIA's 8233A Ultra/133 southbridge, onboard IDE Ultra/133 RAID and four DIMM slots there isn't much more you can ask for. USB 2.0 is gaining a lot of momentum and with most high-end manufacturers including it with their boards, perhaps Abit should also consider adding it in the near future as well.

abit kr7a-133raid

Ships with the following:

  • 2x IDE ATA66/100 Cable
  • FDD Cable
  • Driver CD
  • User Manual
  • Quick Start Guide
  • Blue cable clips

We really pleased with the overall layout of the KR7A-133RAID - everything is well placed and easy to get to. A prime example of that is the location of the ATX power connector, at the top of the board and next to the DIMM slots. The placement ensures that the power cable doesn't interfere with the case air flow and still keeps the trace lines to the onboard powersupply short.

The KR7A-133RAID has three onboard LED's. The orange one lets users know whether if the board has power or not, the green one shows if the board is powered on and the red one shows when the reset switch is pressed. This is quite useful when diagnosing a motherboard problem as it's not always in a case so you can't see what is happening. If I had the chance to make a wish list of features I think it would be good to go one step further and show if there is HDD activity as well.

The KR7A-133RAID has a total of four fan headers and unlike most other manufacturers, all are easily accessible, with three remaining after the processor cooler has been plugged in. With its six PCI slots, you're guaranteed that you won't have any problems with expansion in the future should you need to install new devices, and you are also guaranteed that the DIMM slots will interfere with AGP card. It's a fact of life with boards like this that you need to remove the video card to add memory.

The KR7A also comes with onboard IDE RAID using HighPoint's HPT 372 chipset which has support for Ultra/133 and RAID's 0, 1 and 0+1. The only difference between the original KR7A and KR7A-133 is that the KR7A-133 uses VIA's new VT8233A southbridge which supports Ultra/133 based hard drives. The AGP port on the KR7A-133RAID is within AGP 2.0 spec's so owners of GeForce4 Ti series of cards shouldn't have to worry.

Should you be too eager on your overclocking adventures, it's nice to know that the Clear CMOS jumper is easily accessible at the lower right hand corner of the board (something you will appreciate when the board is installed in case).

As with everything in life, the Abit KR7A-133RAID isn't completely perfect even though we really do like it a lot. With the IDE RAID controller connectors near the bottom of the board, you can only expect to use full length PCI cards in the first three PCI slots. If you did manage to install full length cards in the lower PCI slots, the IDE and floppy drive cables would have to wrap around the devices. This isn't the best solution since it usually means airflow is disrupted.

The floppy drive connector is in one of the worst places for users of large sized cases like the Aopen HX08. Placed near the bottom of the board it may not be long enough to reach lofty FDD positions. At least the accompanying black FDD ribbon cable was long. While it's not really a big deal, I was a bit disappointed that the KR7A-133RAID only came with four USB 1.1 ports, and that the USB header bracket wasn't included. The original KR7A has six USB 1.1 ports and comes with all the appropriate cables (I know because my main rig at home uses the KR7A-RAID).

© 2023 PCSTATS.com Next Page >

 

Contents of Article: ABIT KR7A-133RAID
 Pg 1.  — ABIT KR7A-133RAID Socket A Motherboard Review
 Pg 2.  RAID and Socket Heatsink Clearance Measurements
 Pg 3.  The KR7A BIOS
 Pg 4.  Overclocking and Benchmarks
 Pg 5.  Bechmarks: Winbench, Sandra, PCmark
 Pg 6.  Benchmarks: 3DMark, Serious Sam, RTCW, Conclusions

 
Hardware Sections 


 
PCSTATS Network Features Information About Us Contact
FrostyTech
PCSTATS Newsletter
Tech Glossary
Technology WebSite Listings
News Archives
(Review RSS Feed)
Site Map
PCstats Wallpaper
About Us
Privacy Policy
Advertise on PCSTATS

How's Our Driving?
© Copyright 1999-2023 www.pcstats.com All rights reserved. Privacy policy and Terms of Use.