|
Overclocking Results: |
|
Before the overclocking started, the CPU multiplier was first set to 4x and memory frequency set to run in 133 MHz mode. These settings ensure that neither the processor or memory will hold the motherboard back.
Starting at 200 MHz,
the clock speed was increased slowly in 5 MHz intervals. Unfortunately, processor
overclocking did not go very far and the Gigabyte GA-K8N51PVMT-9 topped out
at 237 MHz.
Not great as overclocking goes, but then again we should
remember that the GeForce 6150 is not intended for the enthusiast markets.
Mainstream consumers want reliability and functionality, not overclocking
options.
To access the "more advanced features" you
have to first press CTRL + F1 in the root menu. The motherboard frequency can be
adjusted between 200-300 MHz in 1 MHz increments. HTT speed and width between the
GeForce 6150 Northbridge and processor can also be adjusted, speed and width
wise. Memory timing adjustments are also found in the Frequency Voltage Control
section.
|
PCStats Test System Specs: |
processor: |
amd athlon64
4000+ |
clock speed: |
12 x 200 mhz
= 2.4 ghz |
motherboards: |
albatron
k8x890 pro ii (k8t890) msi rs480m2-il
(rs480) asrock 939dual-sata2 (uli m1695) chaintech zenith vnf4 ultra (nf4 ultra) dfi lanparty nf4 sli-dr (nf4 sli) epox 9npa+ sli (nf4 sli) ecs kn1 extreme sli (nf4 sli) foxconn winfast 6150k8ma-8ekrs (gf6150) gigabyte gv-k8n51pvmt-9
(gf6150) |
videocard: |
msi nx7800gtx-vt2d256e |
memory: |
2x 512mb pdp pdc1g3200+xblk |
hard drive: |
74gb western digital raptor sata |
cdrom: |
aopen combo 52x |
heatsink: |
amd athlon64 4000+ reference
heatsink |
powersupply: |
pc power & cooling turbocool 510
sli |
software setup |
windowsxp forceware 6.53 forceware
78.01 |
workstation benchmarks
|
sysmark
2004 business winstone 2004 content creation 2004 super pi sisoft sandra
2005 pcmark04 pcmark05 3dmark2001se 3dmark05 aquamark3 comanche 4 x2: the
threat ut2003 ut2004 doom 3
| |