|
Overclocking Results: |
|
There's no doubt if you're getting yourself a 2GB set of
OCZ PC2-9200 FlexXLC Edition memory you're going to overclock. Without further delay here is how the OCZ memory handled in PCSTATS famous overclocking tests...
The OCZ PC2-9200
FlexXLC memory was installed into an ECS
PN2 SLI+ motherboard and an Intel
Core 2 Duo E6600 processor was used to test. Please note that we did not have a watercooling loop available, so the memory was air cooled.
Starting at 800 MHz, and with 4-4-4-12 memory timings, the OCZ PC2-9200 FlexXLC DDR2
memory speed was increased 20 MHz increments. OCZ's PC2-9200 FlexXLC Edition memory handled
overclocking pretty well, and rose easily to 860 MHz before the DDR2 voltage had to be
increased from 1.8V to 1.9V. To reach 940 MHz the memory voltage had to be
increased yet again, this time to 2.0V.
For the OCZ PC2-9200 FlexXLC Edition
memory to break the 1000 MHz mark, with 4-4-4-4-12 CAS latency timings, the memory voltage had to be increased to 2.2V. With tight timings the OCZ PC2-9200 FlexXLC memory reached a maximum speed of 1066 MHz. A good result for sure, but we've seen other comparable DDR2 memory go higher.
Loosening the timings to 5-5-5-18, we increased the memory speed from 1066 MHz. The OCZ FlexXLC Edition memory had no problems cracking 1100 MHz, but 1160 MHz needed a slight voltage bump, this time to 2.3V.
Continuing, PCSTATS was able to overclock the OCZ PC2-9200 FlexXLC Edition memory to a maximum speed of 1220 MHz. Anything higher and the memory would start giving the system errors. Still 1220 MHz is a pretty decent speed, and if you're overclocking everything else in your system you'll see a nice benefit.
Prelude to Benchmarks
The details of how the 2GB OCZ PC2-9200 FlexXLC Edition
memory test system was configured for benchmarking, including the specific
hardware, software drivers, operating system and benchmark versions are
indicated below. In the second column are the general specs for the reference
platforms this pair of PC2-9200 DDR-2 memory is to be compared against. Please
take a moment to look over PCSTATS test system configurations before moving on
to the individual benchmark results.
|
PCSTATS Test System Configurations |
|
Office
Productivity |
Source: Zdnet |
|
Business
Winstone 2004 runs real applications through a series of scripted activities and
uses the time a PC takes to complete these activities to produce its performance
scores.
Content
Creation Winstone 2004 is a system-level, application-based benchmark that
measures a PC's overall performance when running top, Windows-based, 32-bit,
content creation applications in Windows XP.
Office Productivity |
Business Winstone 2004: |
Points |
Ranking |
2GB Kit Patriot
PDC22G800+XBLK (266/800) |
30.2 |
|
2GB Kit Corsair
Twin2X1024-6400C4 (266/800) |
30.3 |
|
2GB Kit OCZ PC2-7200
Platinum SLI (266/800) |
30.1 |
|
2GB Kit Corsair
DOMINATOR Twin2X2048-9136C5D (266/800) |
30.1 |
|
2GB Kit Corsair
DOMINATOR Twin2X2048-8888C4DF (266/800) |
30.5 |
|
2GB Kit OCZ PC2-9200 FlexXLC Edition
(266/800) |
30.6 |
|
2GB Kit OCZ PC2-9200 FlexXLC Edition (266/1220)
|
32.9 |
|
Content Creation 2004: |
Points |
Ranking |
2GB Kit Patriot
PDC22G800+XBLK (266/800) |
41.5 |
|
2GB Kit Corsair
Twin2X1024-6400C4 (266/800) |
41.6 |
|
2GB Kit OCZ PC2-7200
Platinum SLI (266/800) |
41.8 |
|
2GB Kit Corsair
DOMINATOR Twin2X2048-9136C5D (266/800) |
41.8 |
|
2GB Kit Corsair
DOMINATOR Twin2X2048-8888C4DF (266/800) |
42.1 |
|
2GB Kit OCZ PC2-9200 FlexXLC Edition
(266/800) |
42.1 |
|
2GB Kit OCZ PC2-9200 FlexXLC Edition (266/1220)
|
43.1 |
|
The OCZ PC2-9200 FlexXLC Edition memory performs as
expected at DDR2-800 speeds. Overclocking boosts workstation benchmark
performance slightly.