The rear of the Samsung SyncMaster F2380 is
pictured below, a 120VAC power cord plugs into the display on the left side.
Next to it is a hard power switch which will cut power to the monitor entirely,
as opposed to the sleep/standby mode of the control panel's power button.
The Samsung SyncMaster F2380 can accept two dual-link DVI-D inputs and a VGA
input. The secondary DVI cable can be used to hook up a second digital input
device. Both DVI ports are HDCP compatible, so the SyncMaster F2380 can be
hooked up to devices like Blu-Ray players (using an HDMI-DVI converter, not
included).
The articulating stand can be detached by removing two screws,
which opens the panel up for use with 100x100mm or 200x100mm VESA mounts.
The base of the panel can also be removed, simply unscrew the
metal tab and the neck will separate from the base.
RSS Newsletter
